RhinoMarine 3.5.0 Hydrostatics & Stability Report



General Model Information
November 11, 2006 11:06:15 AM Version: RhinoMarine 3.5.0
Company Project Description
Walk On Water Designs Diva 40' Tri Ama
Parts Mirrored Up Direction Fluid Density Refinement Trimming
Yes Positive 64.045 pounds/feet^3 N/A N/A
File Type Path
Model C:\Documents and Settings\Admin\Desktop\phil's tri\Model\ama.oct 7.3dm
HTML Output C:\Program Files\Proteus Engineering\RhinoMarine\default.htm

Upright Condition
Flotation Plane Definition Units (feet)
Constant N (longitudinal) N (transverse) N (vertical)
5.000 0.000 0.000 1.000
Overall Dimensions Units (feet)
Name Value Min Max
Length OA 40.000 0.000 40.000
Length WL 0.000 0.000 0.000
Beam OA 2.403 -1.202 1.202
Beam WL 0.000 0.000 0.000
Depth 4.754
Freeboard -0.240
Draft 4.994
Integrated Properties Units ( feet, feet^2 , feet^3 , pounds)
Name Value Name Value
Volume 232.231 Displacement 14,873.177
LCB 18.153 LCB/LWL Infinity
TCB 0.000 VCB 2.494
Max Section Area 9.210 Long'l Loc Max Area 14.162
Wetted Surface 376.042 Wetted Centroid (longitudinal) 18.071
Wetted Centroid (transverse) 0.000
Wetted Centroid (vertical) 2.473
Displacement-Length Ratio 0.000
Waterplane Properties Units ( feet, feet^2 , feet^3 , pounds/in, feet-pounds/in)
Name Value Name Value
LCF 0.000 LCF/LWL NaN
TCF 0.000 VCF 5.000
M Trans -2.506 M Long -2.506
BM Trans 0.000 BM Long 0.000
Area WP 0.000 Weight to Immerse 0.000
Moment to Trim 0.000 Metacentric Shelf Slope 0.007
Neutral Axis Angle 0.000° Metacentric Shelf Intercept 2.371
Form Coefficients Units (N/A)
Name Value Name Value
Cb 0.000 Cwp 0.000
Cx 0.000 Cp 0.000
Cp aft -1.113 Cp fwd 0.677
Station Data Units ( feet, feet^2 )
Plane Const Wetted Girth Immersed Area Plane Const Wetted Girth Immersed Area
0.000 0.000 0.000 0.000 0.028 0.000
1.000 8.640 1.711 2.000 9.445 2.821
3.000 9.942 3.770 4.000 10.306 4.632
5.000 10.608 5.435 6.000 10.870 6.180
7.000 11.099 6.862 8.000 11.298 7.471
9.000 11.466 7.995 10.000 11.599 8.427
11.000 11.694 8.765 12.000 11.748 9.006
13.000 11.761 9.153 14.000 11.732 9.209
15.000 11.663 9.180 16.000 11.554 9.075
17.000 11.408 8.902 18.000 11.228 8.673
19.000 11.019 8.399 20.000 10.786 8.091
21.000 10.536 7.759 22.000 10.275 7.415
23.000 10.006 7.065 24.000 9.731 6.713
25.000 9.450 6.361 26.000 9.164 6.008
27.000 8.874 5.656 28.000 8.578 5.307
29.000 8.278 4.960 30.000 7.974 4.617
31.000 7.664 4.278 32.000 7.351 3.945
33.000 7.033 3.618 34.000 6.710 3.298
35.000 6.384 2.985 36.000 6.053 2.682
37.000 5.719 2.388 38.000 5.380 2.105
39.000 5.038 1.832 40.000 4.692 1.573
40.000 0.000 0.000

Notes
  1. Dimensions are given relative to coordinate system origin, except for M Trans and M Long which are given relative to the resultant waterplane.
  2. Accuracy of calculations is affected by the density of points in the surface mesh.
  3. All coefficients are based on LWL and maximum draft above.
  4. The accuracy of the sectional area curve, maximum section area and location, and prismatic and midship section coefficients are affected by the surface mesh density, and the number and location of defined stations. In addition, for trimmed waterplanes the sections are no longer exactly perpendicular to the waterplane, also affecting accuracy.
  5. The displacement-length ratio is defined as the computed vessel displacement in long tons divided by the cube of one-hundredth of the waterline length in feet.
  6. The moment to change trim is computed with the assumption that the center of gravity is at the flotation plane.